Leister LHS System 40S

+Request for Quote +Download Product Specifications (PDF) + Download Product Accessories (PDF) +Download Operating Manual (PDF) +Download Drawings (PDF)

LHS SYSTEM 40S 1X 100-230 volts 2 - 4 kW 50 mm outlet Max Temp: 1250° Featuring Built in overheating protection system The Leister Hot Air Tool LHS System 40S heaters and the appropriate blowers are suitable for building into machines and are suitable for continuous use. The double-insulated hot air tool Leister LHS System 40S is small and space efficient. The LHS System heaters include built in power and temperature controllers, built in temperature adjustability via an integrated potentiometer. Also included is a built in interface so that this heater can be controlled externally via a PLC or temperature controller with a 4-20 ma output to the heaters. These heaters feature a RJ-45 connection to external temperature controllers with standard network cables with RJ 45 connectors. The standard Leister LHS System 40S comes with an overheating detection system. In case of interruption of the air supply, the built in detection system will sense this and send a control voltage signal to a devise such as an alarm or relay. In addition the LHS System heaters electronically protect the heating element from burn out. As another alternative, Malcom can supply the Leister LHS System 40S hot air tool with a control system through a PLC or a PID digital temperature controller housed in a compact enclosure that has built-in safety interlocks, system on off switches, air flow confirmation system and power controllers. The Leister LHS System 40S hot air tool is available in many versions as described below. The Leister LHS System 40S hot air tool requires an external air supply and also can be used with compressed air or blown air from the Leister Robust blower or the Leister Airpack blower, as well as airflow valves and on/off valves. Malcom also offers a full line of high pressure regenerative blowers. The Leister LHS System 40S hot air tool is available in single-phase 100V, 120V, 200V and 208-230V, 2000 or 4000 watts. Malcom offers many standard stainless hot air nozzle attachments to direct hot air where you want it. Article No Name ENG 125.968 Air heater LHS SYSTEM 40S 230V/4kW 125.963 Air heater LHS SYSTEM 40S 100V/2kW 125.964 Air heater LHS SYSTEM 40S 120V/2kW 125.965 Air heater LHS SYSTEM 40S 200V/2kW 125.966 Air heater LHS SYSTEM 40S 230V/2kW 125.967 Air heater LHS SYSTEM 40S 200V/4kW The LHS CLASSIC 40S series accepts all the nozzles that fit onto the Type 3300 hot air tools. All LHS CLASSIC 40 S heaters include built in overheating detection system through alarm voltage output. Requires external SCR and temperature controllers in order to control temperatures.