 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
LHS CLASSIC 20S and L |
|
|||||||||||||||||||||||||||||
|
LHS CLASSIC 20S and L 1 X 100-230 volts 1 - 3.3 kW 36.5mm outlet Featuring Built in overheating detection system The Leister Hot Air Tool LHS Classic 20 heaters and the appropriate blowers are suitable for building into machines and are suitable for continuous use. The double-insulated hot air tool Leister LHS Classic 20 is small and space efficient. The Leister LHS Classic 20S hot air tool is available in many versions as described below. The Leister LHS Classic 20 hot air tool requires an external air supply to complete the process heating hot air system. The Leister LHS Classic 20 hot air tool is available in single-phase 100V, 120V, 200V and 208-230V, 1000 or 2000 watts. The standard Leister LHS Classic 20 comes with a overheating detection system. In case of interruption of the air supply the built in detection system will sense this and send a control voltage signal to a devise such as an alarm or relay. These heaters do not have a way of adjusting the temperature. If you need to adjust temperatures you will need a power and temperature controller. You can find information on our web site about the control systems that we offer. As another alternative, Malcom can supply the Leister LHS Classic 20 hot air tool with a control system through a PLC or a PID digital temperature controller housed in a compact enclosure that has built-in safety interlocks, system on off switches, air flow confirmation system and power controllers. The air to the Leister LHS Classic 20 heat gun requires an air source to complete the system. The Leister LHS Classic 20S hot air tool can be used with compressed air or blown air from the Leister Robust blower or the Leister Airpack blower, as well as airflow valves and on/off valves. Malcom also offers a full line of high pressure regenerative blowers, rotary vanes, diaphragms, and linear pumps that can be used as well. Malcom offers many standard stainless hot air nozzle attachments to direct hot air where you want it.
The LHS CLASSIC 20S series accepts all the nozzles that fit onto the Type 3000 hot air tools. All LHS CLASSIC 20S heaters include built in overheating detection system through alarm voltage output. Requires external SCR and temperature controllers in order to control temperatures. |
|
| Top | Contact
Us | Site Map | call
us toll-free: 888.807.4030
|
|
|