 |
|
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
LHS CLASSIC 40L |
|
|||||||||||||||||||||
|
LHS CLASSIC 40L 3 X 230 - 440 volts 2 - 4 kW 50 mm outlet Featuring Built in overheating detection system The Leister Hot Air Tool LHS Classic 40L and the appropriate blowers are suitable for building into machines and are suitable for continuous use. The double-insulated hot air tool Leister LHS Classic 40L is small and space efficient. The Leister LHS Classic 40L hot air tool is available in many versions as described below. The Leister LHS Classic 40L hot air tool requires an external air supply to complete the process heating hot air system. The Leister LHS Classic 40L hot air tool is available in three-phase 230V-440V, 2000 or 4000 watts. The standard Leister LHS Classic 40L comes with a overheating detection system. In case of interruption of the air supply the built in detection system will sense this and send a control voltage signal to a devise such as an alarm or relay. These heaters do not have a way of adjusting the temperature. If you need to adjust temperatures you will need a power and temperature controller. You can find information on our web site about the control systems that we offer. As another alternative, Malcom can supply the Leister LHS Classic 40L hot air tool with a control system through a PLC or a PID digital temperature controller housed in a compact enclosure that has built-in safety interlocks, system on off switches, air flow confirmation system and power controllers. The air to the Leister LHS Classic 40L heat gun requires an air source to complete the system. The Leister LHS Classic 40L hot air tool can be used with blown air from a wide variety of Leister blowers as well as airflow valves and on/off valves. Malcom also offers a full line of high pressure regenerative blowers as well. Malcom offers many standard stainless hot air nozzle attachments to direct hot air where you want it.
The LHS CLASSIC 40L series accepts all the nozzles that fit onto the Type 3300 hot air tools. All LHS CLASSIC 40 L heaters include built in overheating detection system through alarm voltage output. Requires external SCR and temperature controllers in order to control temperatures. |
|
| Top | Contact
Us | Site Map | call
us toll-free: 888.807.4030
|
|
|