Leister Type 40000

+REQUEST FOR QUOTE +Download Product Specifications (PDF) + Interactive Hot Air Systems Conversion Formula Calculator

Temperature electronically controlled up to 650°C The Leister Hot Air Tool Type 40000 and the appropriate blowers are suitable for building into machines and are suitable for continuous use. The double-insulated hot air tool Leister Type 40000 is our largest heater. The Leister Type 40000 hot air tool is available in many versions as described below. The Leister Type 40000 hot air tool requires an external air supply to complete the process heating hot air system. The Leister Type 40000 hot air tool is available in three-phase 208-230V, 380-440V, and 480V, up to 49kw. The standard Leister Type 40000 comes with a potentiometer for fine-tuning the temperature electronically from ambient to 650°C. The type 40000 has a built-in overheating protection system against total failure to protect the overall heat gun. If required, the potentiometer can be sited away from the hot air tool, max. lead length 5m. For precise temperature control with a digital display of set and actual temperatures from the heat gun, the Leister Type 40000 hot air tool has a built-in interface so that this unit can be controlled directly from a PLC or external temperature controller. A thermocouple can be placed in the hot air stream to provide feedback to the PLC or temperature controller. As another alternative, Malcom can supply the Leister Type 40000 hot air tool with a PID digital temperature controller housed in a compact enclosure that has a built-in female mini plug port for a K Type thermocouple and two alarm output ports, pre-wired with mains power cord, thereby making it turnkey. The auto-tune function in the controller will have to be activated once the heater is mounted in place in order to self-tune the hot air system for the process heat application. The Leister Type 40000 hot air tool can be supplied without any electronics or heating element protection; however, it will have built-in overheating protection to protect the heat gun. Malcom offers external SCR power controllers, solid state contactors, and a full line of 1/16 DIN digital process controllers. The air to the Leister Type 40000 heat gun requires an air source to complete the system and can be used with blown air from the full line of Leister regenerative and side channel blowers. Malcom also offers airflow valves and on/off valves, as well as a full line of high pressure regenerative blowers, rotary vanes, diaphragms, and linear pumps that can be used as well. Malcom offers many standard stainless hot air nozzle attachments to direct hot air where you want it.