Leister Vulcan E Hot Air Blower

+REQUEST FOR QUOTE +Download Product Specifications (PDF) + Interactive Hot Air Systems Conversion Formula Calculator

The Leister Hot Air Blower Vulcan E, with its built-in blower, is suitable for building into machines and for continuous use in process heating applications in process heat systems. The heat output is electronically adjustable between ambient and 650°C. The air intake regulator can be used to reduce the maximum airflow of 1500-1700i/min by up to 45%. The built-in blower has a low noise level 65 dB(A). The unit is powered by a three-phase blower motor with a condenser so that the correct turning direction of the blower is always assured. The central connection blocks for the mains power are inside the plastic housing. The high temperature element is electronically protected against overload in case the air supply is interrupted. Four clearance holes of 6.5mm diameter are provided on the underside of the unit for mounting the blower onto your machine. The Leister Vulcan E hot air blower is available in many versions as described below. The Leister Vulcan E hot air blower is available in three-phase 208-230V, 380-480V, up to 10kw. The standard Leister Vulcan E comes with a potentiometer for fine-tuning the temperature electronically from ambient to 650°C. The Vulcan E has a built-in overheating protection system against total failure to protect the overall heat gun. If required, the potentiometer can be located away from the hot air tool, max. lead length 5m. For precise temperature control with a digital display of set and actual temperatures from the heat gun, the Leister Vulcan hot air blower has a built-in interface so that this unit can be controlled directly from a PLC or external temperature controller. A thermocouple can be placed in the hot air stream to provide feedback to the PLC or temperature controller. As another alternative, Malcom can supply the Leister Vulcan hot air blower with a PID digital temperature controller housed in a compact enclosure that has a built-in female mini plug port for a K Type thermocouple and two alarm output ports, pre-wired with mains power cord, thereby making it turnkey. The auto-tune function in the controller will have to be activated once the heater is mounted in place in order to self-tune the hot air system for the process heat application. The Leister Vulcan hot air blower can be supplied without any electronics or heating element protection; however, it will have built-in overheating protection to protect the heat gun. Malcom offers external SCR power controllers, solid state contactors, and a full line of 1/16 DIN digital process controllers that can be used to control the heater. Malcom offers many standard stainless hot air nozzle attachments to direct hot air where you want it. Demonstration tools available on request. Click here for details on our "Try It Before You Buy It" program.